CKU 060 Series

Dust collector for laser marking equipment with relatively short operating time. Suitable for dust collection with low viscosity fumes, such as metal and glass.

High pressure
AT3 panel
ROHS compliant as standard
For general environments
where a delivery date is specified, we can deliver a model that is compatible with CE standards.
CKU-060AT3-ACC
Slider

Control panel

AT3 panel

See features page for more details.

Ethernet / RS-485

Option feature

All functions that can be operated on the AT3 panel can be operated by a PC with Ethernet or RS-485 communication.

Remote control

Remote cable

(sold separately/model: Using MT-173-8 (3 m) enables remote operation of peripheral equipment.

Motor cable receiving port on main body
  • 1.Operation input signal
  • 2.Operation pressure signal (DC1-5V)
  • 3.Filter clogging signal
  • 4.Remote-control operation switching input signal
  • 5.Operating signal
  • 6.Abnormality signal
  • 7.Change of operating level input signal (DC0-5V)
  • 8.Gnd
Operation ON/OFF
Change capacity level (air volume)

List of application

Removal of dust when
marking SS

Removal of dust when
marking bearings

Removal of dust when
marking bearings

CKU-060-List of application

Removal of dust fumes from laser marker

Removal of dust when
marking brake drum

Dimensions

CKU-060AT3-ACC

Product structure and features

1. Detachable flange

The size of the flange at the suction port can be changed with a single touch.

2. Pre-filter (Primary filter)

The specially designed structure causes dust collision and buffering.The particles become larger and are caught by the primary filter.The primary filter component is cassette type with a polypropylene pleat configuration. The disposable filter can be easily replaced.

3. Activated carbon cassette (Secondary filter)

Any fine particles not trapped by the primary filter collide with the granular activated carbon and are trapped as they pass through.Smells are removed at the same time.

4. High performance filter (Tertiary filter)

As dust is adsorbed from the activated carbon filter, the air is cleaned and expelled as exhaust. Any dust particles not trapped by the secondary filter are caught by the high-performance filter. Prevents activated carbon particles from coming in on the blower side.

Easily Detachable Flange Type (sold separately)

Size Type
φ38 FRJ-D-38-35-92
φ50 FRJ-D-50-35-92

Filter Type

Model Pre-filter
(Primary filter)
Activated carbon cassette(Secondary filter)
(Activated carbon amount approx. 1.6kg)
High performance filter
(Tertiary filter)
CKU-060AT3-ACC CHF-2222-40 ACC-2525-75ST CHF-2525-50
Note:Contents may change without notice.

List Of Specifications


Model Output Voltage Frequency Rated current
CKU-060AT3-ACC 50W 100V (single phase) 50/60Hz 2.3A
Maximum
air flow
Maximum
static pressure
Noise level

*1
Suction port
(hose) size
Suction port sold separately
(size can be changed)
2.8㎥/min 2.5kPa 53-61dB φ65 φ50 ・φ38
Model To be used
with 200-240V
CE compliant Panel Power cable
CKU-060AT3-ACC AT3 3m
Remote control
feature
Suitable for use
in clean rooms
Mass Main body dimensions
(D×W×H)
15.8kg 271×288×517mm
*1 Measurements obtained in Scale A (dBA) from a randomly selected position at a distance of 1m using a unit with a hose connected to its suction port.

 

Note:Contents may change without notice.