This is an ultra-high pressure laser clean dust collector, not available from any other company. Collects fumes and dust scattered in the immediate vicinity. Ultra-high pressure type, resistant to heavy loads. Suitable for dust collection with branching and suction with a thin piping nozzle.

High pressure
AT3 panel
Dust removal function Pulse type
where is delivery date is specified when we delivery model that is compatible with ce standard
For general environments
where a delivery date is specified, we can deliver a model that is compatible with CE standards.


Incorporates new “UD” feature
During maintenance of the primary filter chamber,
the upper section of the chamber (pulse chamber / blower control chamber) can be lifted or lowered manually. The primary filter chamber can be easily removed.
Dust tray
The up/down lift mechanism makes it easy to attach and remove the dust tray.Casters attached with the dust tray makes it convencient to remove without any effort.It is then easy to dispose of the dust and to replace the zeolite.
Large inspection window
You can check the zeolite scattering status, the effective-ness of the pulse jet in removing dust,
the suction status, and the condition of the filter through this window.

Control panel

AT3 panel

See features page for more details.

Ethernet / RS-485

Option feature

All functions that can be operated on the AT3 panel can be operated by a PC with Ethernet or RS-485 communication.

Remote control

Remote cable

(sold separately/model: Using MT-173-8 (3 m) enables remote operation of peripheral equipment.

Motor cable receiving port on main body
  • 1.Operation input signal
  • 2.Operation pressure signal (DC1-5V)
  • 3.Filter clogging signal
  • 4.Remote-control operation switching input signal
  • 5.Operating signal
  • 6.Abnormality signal
  • 7.Change of operating level input signal (DC0-5V)
  • 8.Gnd
Operation ON/OFF
Change capacity level (air volume)

Product structure and feautures

The zeolite is pre-coated by a proprietary scattering mechanism.

1. Primary filter

Long filter life is achieved even during the collection of fine dust and viscous fumes caused by laser processing.
Dust peeling properties improved with teflon filter.
Airborne fumes and dust particles are sucked in by the suction blower, stirred up with zeolite from the scattering port then laminated on the filter as the zeolite is activated.

2. Filter cleaning function [Pulse type]

We have installed a proprietary
continuous pulse air (compressed air) cleaning function.

3. Blower

Equipped with a relief valve. Operates when a specified pressure level is exceeded to protect the blower from overheating.

Activated carbon

Deodorizing activated carbon can be installed as an option.

List of application

Extraction of fumes and dust during battery sealing process

Removal of dust and fumes from laser cutting lithium-ion battery electrodes

Removal of dust and fumes from laser cutting polarizing plate

Removal of dust from silicon isolator

Removal of dust when using laser cutting sheet for interior work



Filter Type

Model Primary filter Zeolite
Type Number Total filtration area
CHP-5000AT3-DSA-UD CS-200-500-75P-R 12㎡ ZEO-13000(13.0kg)

List Of Specifications

Model Output Voltage Frequency Rated current
CHP-5000AT3-DSA-UD 5000W 200V (three phase) 50/60Hz 26.5A
air flow
static pressure
Noise level

Suction port
(hose) size
Compressed air
consumption volume
10㎥/min 18kPa 68-74dB φ100 25L/min(Connection port φ8)
air pressure
To be used
with 200-240V
CE  compliant Panel Power cable
0.45-0.55Mpa Standard AT3
Filter cleaning function Remote control feature Suitable for use
in clean rooms
Dust collection
volume capability

Pulse type 31.5L 293kg
Main body dimensions
*1 Measurements obtained in Scale A (dBA) from a randomly selected position at a distance of 1m using a unit with a hose connected to its suction port.(Pulse noise removed)
*2 As a reference, the dust collection capacity is about 70% of the amount that can be withdrawn.


Note:Contents may change without notice.